A clear phone case is a popular choice. After investing hundreds or even thousands of dollars on a new phone, the last thing you want to do is cover it up with a bulky phone cover. Clear phone covers allow you to show off your new device while also ensuring that it gets the necessary protection from bumps and scratches.
Clear phone covers, on the other hand, are known for yellowing over time and becoming dull from exposure to UV light and weather. Clear phone cases, unlike coloured phone covers, reveal their wear and tear much faster, yet there are ways you may preserve your cover.
According to studies, mobile phones and phone cases contain 10 times more germs than a toilet seat. Following an investigation that revealed the phones they tested harboured more than 17,000 bacterial gene copies, this occurred.
HOW TO CLEAN A SILICONE PHONE CASE
Silicone phone coverings are quite popular because of their durability, ergonomic design, and style variety. Like any other phone cover, they must be cleaned regularly to prevent holding viral and bacterial illnesses.
It’s important to clean and disinfect your silicone phone cover to keep it looking new. Start by cleaning both the inside and outside of the case with a disinfectant wipe, paying careful attention to the inner corners. The rubbing alcohol should aid in the removal of any germs remaining on the case.
If you have persistent stains, a dish scrub and warm water with a toothbrush may often help remove any dirt. The dish soap will assist cut through any dirt and gunk that has adhered to the surface, but you’ll only need to do so every few months or so.
HOW TO CLEAN A YELLOW OR BROWNING PHONE CASE
Before we get into the ways to clean a transparent phone case, it’s worth noting that certain causes can turn clear phone cases yellow and, in some circumstances, dark brown. In most situations, transparent phone covers are manufactured from polysiloxane since it is both inexpensive and versatile.
However, as the material becomes older, it begins to yellow. It is a process that speeds up when exposed to UV light, heat, and other pollutants in everyday life. If they are not cleaned properly, they might eventually become brown, especially if oil absorption from perspiration and lotions is involved.
Here are some recommendations to help your clear phone cover stay clean and, more importantly, transparent:
A sponge or cloth soaked in mild, basic dish soap is another good approach to clean your phone case. Scrub your phone case entirely using a toothbrush and a combination of warm water and dish soap. Work the solution into the interior corners where bacteria tend to accumulate. Allow the case to dry completely before replacing your phone inside.
Baking soda is great for removing a variety of stains, including those on cell phone covers. Sprinkle it over the surface first and then work it in with a wet toothbrush. Rinse out the solution and dry the cover off with a soft towel after a few minutes.
Another option is to use a combination of toothpaste and paint thinner to remove yellow discolouration. The first step is to apply the toothpaste to the case and massage it with an abrasive sponge or steel wool. Rinse it away after a few minutes and apply paint thinner with steel wool.
Finally, if the phone’s yellow and brown discolouration is not going away, use rubbing alcohol to disinfect the case. Simply allowing the phone to soak in rubbing alcohol for a few minutes should be sufficient to remove stubborn stains. Carefully removing any extra liquid with a clean and dry cloth might assist in fading the yellowing and keeping the case.
HOW TO DEEP CLEAN YOUR PHONE CASE
Whether it’s made of plastic, silicone, or rubber, ensure that the interior and exterior of your clear phone cover are cleaned regularly. We’ll go through each one below:
Plastic
Clear phone cases are made of plastic, which is an extremely frequent material used in the making of a variety of phone coverings, including transparent ones. It’s more resilient than other options and can withstand harsher cleaning chemicals such as bleach, but dish soap may also be beneficial to it.
To begin, you must take the appropriate precautions, which means making sure that the area you will be cleaning the case is well-ventilated. Put on rubber gloves since the bleach might irritate skin once you’ve prepared the area.
Begin by combining one teaspoon bleach for each cup of water, being careful not to spill the bleach onto your phone case or other surfaces.
Mix the detergent with warm water. Submerge your case in the solution and leave it for up to 10 minutes. If you can still see marks after this period, soak it longer while using a brush or toothpick to clean the tainted areas. If stains persist in the corners despite your efforts, a toothbrush is an excellent tool for getting.
Remove the battery and SIM card, rinse your phone in warm water, then pat it dry with a soft cloth or paper towel. Allow your phone to air-dry for 30 minutes before reinserting it. Use a disinfecting wipe once weekly to keep it clean.
Rubber & Silicone
The next two cases we’ll look at our rubber and silicone. Rubber and silicone are more delicate than plastic, so you’ll need to use a gentler cleaner without causing harm. However, because you must be more careful not to damage it, giving it a complete deep cleaning may be difficult, therefore it might require multiple tries depending on the condition.
Start by combining a little amount of dish soap with a bowl of warm water. Once combined, wet your cloth and toothbrush, and begin to clean the discoloured areas of your case, but be careful to wash the whole surface as well. The toothbrush will come in handy once more to get into hard-to-reach regions were germs. If you still see dirt and stains after a while, sprinkle some baking soda on top and scrub it in with the wet toothbrush head. If the discolouration is mostly yellow or brown, make a paste of baking soda and water and apply it to the case for a few minutes before cleaning.
After you’ve made sure the entire case has been cleaned, rinse it thoroughly with warm water and dry it using a soft cloth or paper towel. Allow the case to dry for at least 30 minutes before slipping your phone back inside. Wipe the casing down with a disinfecting wipe once a week to keep it clean and do a deep cleaning procedure.
Many people use hot water to disinfect items, but it is never advised to do so with plastic, silicone, or rubber phone cases, or put them in a dishwasher. The substantial temperature swings are likely to damage and warp your case beyond repair.
How to clean a clear phone case that has turned brown?
After a while, you may notice that the colour of your formerly clean phone cover has changed from an already unattractive yellow to a more brownish yellow. The reason for this is no different than why paper yellowing occurs, and it ultimately comes down to sun exposure combined with ageing polymers. There are many methods for cleaning transparent phone cases and ways to assist you to slow the process down.
However, attempting to return a clear phone cover to its original condition may be difficult if it has begun to discolour.
At Imfixed, they are pleased to provide a large selection of Clear Phone Cases & Holders for a variety of brands and versions. Why not have a look at the different options accessible on our website if you want to upgrade your clear phone case with a newer, stronger model? If you have any queries regarding any of our phone cases or holders.
Twitter | Facebook | Bloglovin | Instagram | Pinterest
Collaborative Post
Copyright protected by Digiprove © 2022 Louise Smith
Leave a Reply